Introduction
According to Mark Roemer Oakland, there could be a number of reasons that can cause electrical problems at your home. Some of these reasons have obvious signs that you can detect or observe easily and fix without any issues. Other problems require a deeper inspection and professional help.
The Reasons
Here are a few common reasons for electrical problems at home:
1. Circuit overloading – Circuit overloading is one of the most common reasons for frequent electrical problems at home. This usually happens when you overburden a single circuit board by attaching too many electrical appliances to it. For instance, daisy-chaining power boards or connecting a complete home entertainment setup to a single board.
To reduce the chances of circuit overloads, be mindful of how you connect electrical appliances around your home. For best results, we recommend you spread out the load throughout the home and unplug any devices such as phone chargers when they are not in use.
2. Electrical surges – Electrical surges can occur due to damaged power lines, natural phenomena such as lighting strikes, bad electrical wiring, or even when you connect a faulty appliance. These typically last a few microseconds and do not cause major harm if they occur once in a while.
However, when they occur frequently, they can become a real issue and damage electrical appliances that are connected to the home grid. If you suspect a faulty device or power board, try disconnecting it from the home grid. However, we recommend you consult a professional electrician if the issue is not solved.
3. Tripped circuit breaker – Circuit breakers are built to protect your home from dangerous electrical mishaps and are designed to cut off power delivery when too many high-wattage items are connected to a single circuit simultaneously. For instance, using hairdryers, air conditioners, washing machines, and microwaves simultaneously can trip the circuit breaker.
This is actually a good thing since it means that your home is well-protected against huge power surges. To reduce the risk of tripping the circuit breaker, ensure you don’t connect too many high-watt appliances to a single circuit, or at least, try to use a setting in the appliance that uses less power.
4. Faulty switches – Faulty switches are more common in old homes when they are nearing the end of their life, but they can also be attributed to sub-standard products or shoddy workmanship, especially if you notice them in new homes. For instance, faulty dimmer switches that fail to adjust the brightness of lighting. Of course, there could be an issue with the wiring, circuit, or outlet too. However, you have to call in a professional electrician to figure out the root cause of the problem in such cases.
Conclusion
Mark Roemer Oakland suggests you install a high-quality residual current circuit breaker (RCCB) in your house to keep it protected against electrical hazards such as electric fire. RCCB offers protection against direct as well as indirect contact, and protection of earthing against corrosion.